ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.

1Press the PAUSE/SEARCH button during stop mode.

°“AL SEARCH 01” will be displayed on screen.

2Press the l (or j) button to set the desired alarm number (1 to 99), then press the FF (or REW) button.

°The desired alarm is searched and a still image of the beginning of the alarm recording will appear on-screen.

NOTE:

•The alarm number is relative to the actual tape position. (Please refer to the illustration below.)

 

 

 

 

 

Playback

 

 

 

Alarm number 2

1

 

 

1

2

Alarm

 

input point

 

 

 

 

 

 

 

trigger

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rewind direction

 

 

 

Fast-forward direction

 

 

 

 

 

Actual position

 

 

 

 

 

 

 

3Press the PLAY button.

°Playback will start.

NOTE:

•If during a search the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

Alarm Scan

To look for an alarm recording by viewing the first 5 seconds of each alarm recording.

1Press the PAUSE/SEARCH button twice during stop mode.

°“AL SCAN” will be displayed on screen.

2Press the FF (or REW) button.

°The unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording.

°To cancel the alarm scan mode, press the STOP button.

3While the desired recording is being played back, press the PLAY button.

°Playback will start, alarm scan mode is cancelled.

NOTE:

•If during a scan the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

26

English