SETTING THE CASSETTE EJECT MODE

Cassette Eject Setup

When using 2 VCRs or more, the cassette tape of all the VCRs or some of the VCRs can be ejected, if the EJECT terminals on the VCRs are connected as indicated.

1Press the MENU button until the (SET UP 4) menu is displayed.

@@@@@@@<SET@UP@4>

*SW@OUT

@@FIELD@@@@@@@@@01

@@TIMING@@@@@@@@FIELD

@@8H@@@@@@@@@@@@Y

*THREAD@CHECK@@@Y

*VIDEO@LOSS@@@@@N

*REC@SPEED@@@@@@N

*EJECT@SET

@@EJECT@MODE@@@@EJECT1

@@OPERATION@@@@@SLAVE

2Press the ] button, until the “EJECT MODE” setting is flashing.

3Press the l (or j) button to set the desired cassette eject mode.

EJECT1 . . . . . The cassette is ejected only if the VCR is not in recording mode.

EJECT2 . . . . . The cassette is ejected only if the VCR is in stop mode.

4Press the ] button, until the “OPERATION” setting is flashing.

5Press the l (or j) button to set the desired operation.

SLAVE . . . . . . When the EJECT button is pressed, the cassette tape of that VCR only will be ejected.

MASTER . . . . When the EJECT button is pressed, the cassette tape of that VCR and of any VCR connected after it will be ejected.

6Press the PAUSE/SEARCH button to save the settings.

NOTE:

•The EJECT button will not be operative during recording mode.

EJECT terminal connection

 

VCR No. 1

 

VCR No. 2

 

EJECT

 

EJECT

COM OUT IN

COM OUT IN

 

 

 

 

 

 

 

 

 

 

 

 

EJECT IN terminal

•Depending on the (SET UP 4) menu “EJECT MODE” setting (see “Cassette Eject Setup”), the cassette loaded in the VCR is ejected when there is an input at this terminal.

EJECT OUT terminal

•When the EJECT button is pressed (if the VCR is setup as “MASTER”, see step 5 under “Cassette Eject Setup”) or when there is an input (trigger) at the EJECT IN terminal, a signal is output at this terminal, even if the security lock is set or if a cassette is not loaded.

English

37