RQ4Q/EX (TLS-1960P GB) Wed. May, 08/2002

SUPERIMPOSE DISPLAY

Selecting the Superimpose Display

You can select to display or not the date, time, tape speed mode and number of alarm recordings.

1 Turn the power on to all

2PressMENUthebutton to display the MAIN MENU.

3TurnJOGthedial to select the“2.DISPLAY/SW OUT SET” line, then turn the SHUTTLE ring clockwise.

øThe (DISPLAY/SW OUT SET) menu appears.

<DISPLAY@SET>@@@@SET@UP

DATE@@@@@@@@@@@@@Y

TIME@@@@@@@@@@@@@Y

SPEED@@@@@@@@@@@@Y

ALARM@COUNT@@@@@@Y

<SW@OUT@SET>

TIMING@@@@@@@@@@@FIELD

FIELD@@@@@@@@@@@@1

3H@MODE@@@@@@@@@@Y

4 TurnSHUTTLEthe ring clockwise.

5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.

SET UP . . . . . . . . . . . . Set each item (Individual) ALL Y . . . . . . . . . . . . . . To set all items to“Y” ALL N . . . . . . . . . . . . . . To set all items to “N”

øIf using the “SET UP” setting, continue with steps 6 to 8.

6TurnJOGthedial until the item to be changed is highlighted, then turn theSHUTTLE ring clockwise.

7TurnJOGthedial to set“Y” (displayed) or “N” (not displayed), then turn the SHUTTLE ring clockwise.

Changing the Superimpose Display

Position

1 Turn the power on to all input de

devices used.

ø The superimpose display appears.

ø If the superimpose display does not appear, press the ON SCREEN button. The display will be turned on and off alternately each time the ON SCREEN button is pressed.

15-10-2002@TUE@000 15:20:00@@@@@3

2 To change the displaySHIFT « position, p

(or]) button.

øThe display will move towards the right (or the bottom).

NOTES:

œIf SHIFTthe« (or]) button is kept pressed for second or more, the display will move a speed.

œThe display position cannot be change recording.

DATE . . . . . . . . . . . . . . The date appearsTIME. . . . . . . . . . . . . . . The time appears

SPEED . . . . . . . . . . . . . The recording /playback speed mode appears

ALARM COUNT . . . . . . The number of alarm recordings appears

8 Repeat6stepsand7when setting other items.

9 When finished,MENU EXITpressbutton. the

NOTE:

œWhen ONtheSCREEN button is pressed and the display appears, the items for which“Y” have been set are recorded. The items for which “N” was set at

step 7 above are not recorded.

English

13