ΡΘ4Θ/ΕΞ (ΤΛΣ−1960Π ΓΒ) Ωεδ. Μαψ, 08/2002
OUTPUT TERMINALS
TAPE END OUT TerminalCOM Terminal
œ During recording, when the endœCommonof theGNDtape(ground)is reachedterminal when conn
or when | the tape counter readingotherindicatesterminals3 tohours,external devices. | |
the output becomes 0V (Low). During autorepeat | ||
recording, the output becomes 0 V (Low) for about 2 | ||
seconds | only. | TIMER OUT Terminal |
|
œDuring timer recording, the output be
œTo reset the output,STOP or EJECTpressbutton. the
œDuring timer recording
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“5.ALARM/SERIES REC SET” line, then turn the SHUTTLE ring clockwise.
øThe (ALARM/SERIES REC SET) menu appears.
Timer recording
5V (H)
(Output impedance:Ω)5.7 k 0V (L)
<ALARM/SERIES@REC@SET>
*ALARM@SET
@@MODE@@@@@@@@@@@Y1
@@SPEED@@@@@@@@@@3H
@@DURATION@@@@@@@20S
*1@SHOT@SET
@@FIELD@@@@@@@@@@1
@@INTERVAL@@@@@@@1M
*SERIES@REC@@@@@@N
*TAPE@END@OUT@@@@3:00
4TurnJOGthedial until the“TAPE END OUT” setting is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.
3:00 . . . . . . . The output becomes 0 V (Low) when the tape counter reaches “3H 00M 00S” and/or when the tape reaches the end.
END . . . . . . . The output becomes 0 V (Low) when the tape reaches the end.
NOTES:
œIf “SERIESthe REC” is set to “Y” in the (ALARM/SERIES REC SET) menu, the output becomes 0 V (Low) for about 2 seconds when the counter reaches “3H 00M 00S”, even if the “TAPE END OUT” is set to “END”.
œIf “SERIESthe REC” is set to “Y” in the (ALARM/SERIES REC SET) menu, the output becomes 0 V (Low) until 5 minutes have passed after the tape reaches the end.
6PressMENUtheEXIT button.
Ενγλιση | 45 |