Sanyo TLS-9924P NORMAL PLAYBACK, Normal Playback, SH@-:, – button, repeatedly, button repeatedly

Tracking Control

RQ4Q/EX (TLS-1960P GB) Wed. May, 08/2002

NORMAL PLAYBACK

Normal Playback	Vertical Lock Control
1 Turn on the power to the DuringVCR andstillTV monitorimage mode,.
	1 PressV.theLOCK+button repeatedly to red
2 Load the video cassette tape.
3 PressREC/PLAYthe	lSPEED(orj) button tovertical rolling of the image.
	2 If it cannot beV.corrected,LOCK– button	press

select the playback speed mode.

repeatedly.

ø The selected playback speed mode is

displayed on the digital display.	NOTE:
displayed on the digital display.
NOTES:	œ This function does not operate when a
NOTES:	display appears on the digital displa
	display appears on the digital displa
œ A slow motion effect or accelerated playback
effect can be achieved by using a slower or faster
	Sharpness Control
playback speed than the speed used for recording.
	1 During playback,SHARPNESSpress and hold	t
œ If the playback speed“000”, mode is set to
	button for 3 seconds or more.
playback (step 4) will not be possible.
4 PressPLAYthebutton.	ø “SH@-:-”appears on the digital display.
4 PressPLAYthebutton.

øPlayback starts.

øIf necessary, adjust the tracking to eliminate the noise from the picture.

øIf the image is unstable (rolling vertically), adjust the vertical lock control to correct.

2 PressSOFTthe(orSHARP) button for the desi sharpness of the image.

3 When finished,SHARPNESSpressbuttheon.

NOTE:

œ This function does not operate when a

	display appears on the digital displa
5 To stop playback,STOPbuttonpress. the
ø To advance (or rewind) the tape, turn the	Audio Playback
SHUTTLE ring clockwise (or counterclockwise).
NOTE:	œ Audio playback is only possible in 3-
	24-hour modes.

œA tape recorded on a time lapseœ The videoplaybackcassettespeed has to be the same recorder produced by another recordingmanufacturerspeed,may forn t normal playback play back with the same degree of clarity on this unit.

œFor a tape recorded in 12-hour and 24 modes, to playback AUDIOtheaudio,ON press t

button afterPLAYpressingbutton“A” will.bethe

displayed to the left of the playback speed on the

If there is noise in the image during playback, digital display.

1 While looking at the playback picture, press the TRACKING+button repeatedly to minimize the noise.

2 If it cannot be TRACKINGminimized,–press the

button repeatedly.

NOTE:

œThis function does not operate when a warning display appears on the digital display.

English