Day/Time Search | NOTES: | |
| This searches for a specified day/time for still images to | œ If the end of the tape is reached du | |
| be played back. | tape will rewind and stop. If the beg | |
1 PressSTANDBY/ONthe button. | is reached, it will stop. | |
œ The alarm and day/time data are recor | ||
| 2 PressSEARCHthebutton three times during stop | ||
in a similar format. If they overlap, | ||
mode. | have the priority. Therefore, when s | |
ø “T/D SEARCH 01 00:00” will be displayed on | day/time when an alarm recording was | |
screen. | day/time search will not stop at the | |
| 3 PressREC/PLAYthe SPEED l (orj) button | such a case, use alarm scan to find t | |
to set | ||
| recording location. | |
the desired day,SHIFTthen« buttonpress.the | ||
| 4 PressREC/PLAYthe SPEED l (orj) button | œ The day/time search function may not | |
to set | ||
| correctly if searching for a timer re | |
the desired hour,SHIFTthen« buttonpress. the | ||
| 5 PressREC/PLAYthe SPEED l (orj) button | the clock on the recording VCR has be | |
to set | ||
the desired minutes. | using the CLOCK ADJUSTMENT function. | |
œ If the recording has been made in 120 | ||
NOTES: | ||
mode, the day/time search with a minu | ||
| step5 above) will not operate. When | |
œ The setting can be made in 10 minutes | ||
increments only. | day/time search function on such a | |
minutes 5(seeabove)step“00”. to | ||
| ||
œ For recordings made on other VCRs, the exact | ||
| œ If a recording on a tape extends for | |
time may not be found even if the minutes are | ||
| period, the same day may be present t | |
entered. For tapes recorded on older models of | ||
| tape. If such a day is searched, sin | |
VCRs produced by this company (the ones | ||
| month search setting, the desired day | |
without a minutes setting for the day/time search | ||
| found. | |
function), make sure“00”to. set the minutes to | ||
| 6 TurnSHUTTLEthe ring clockwise (or | œ This function does not operate when a | |
display appears on the digital displa | ||
| counterclockwise). | ||
| ||
ø The desired day/time is searched and a still |
| |
image of the recording will appear |
| |
| 7 PressPLAYthebutton. |
| |
ø Playback will start. |
| |
TAPE COUNTER
Using the counter, it is easy to find a desired recording. NOTES:| 1 PressCOUNTERthe RESET button, at the | œ There is no tape counter indication f | |
| beginning of the desired recording. | portions of the tape. | |
ø The counter will be reset to “0H 00M 00S”. | œ In the | |
| 2 PressCOUNTERthe MEMORY button. | counter indicates real hours, minutes | |
ø “[” appears on the digital display. | œ In the other recording speed modes, t | |
indication is a ratio of the | ||
ø To cancel the counter memory function, press | ||
indication. (In | ||
the COUNTER MEMORY button a second time. | ||
of the tape counter actually represents approximately | ||
| ||
3 After recording SHUTTLEor playback,ring 27/3 = 9turnreal secondsthe.) | ||
| counterclockwise from stop mode. | œ There may be a slight discrepancy bet | |
ø The tape is rewound to the counter “0H 00M | position shown on the tape counter an | |
00S” reading. | tape position. | |
øIf you rewind the tape past the “0H 00M 00S” position, turn the SHUTTLE ring clockwise.
œWhen rewinding the“0H 00Mtape00S” past the position, a minus (– ) sign will be displayed.
English | 37 |