RQ4Q/EX
SINGLE IMAGE RECORDING
The single image recording function of this VCR can be used to create image data files or animations.
NOTES:
œThe trigger1 SHOTatIN terminaltheshould be on for 0.1 sec. or more.Single Image Recording Setup
œFollowBeforethestarting steps, under“NORMAL RECORDING”.
œThe trigger 1intervalSHOT IN terminalatvariesthe according to the number of images to record, but should be over 1 sec.
1 In stop mode,REC/PLAYpressSPEED lthe(or œ Alarm recording is not possible durin j) button, to set the“000”.recordingrecordingspeed to.
2PressMENUthebutton to display the MAIN MENU.
3TurnJOGthedial to select the“5.ALARM/SERIES REC SET” line, then turn the SHUTTLE ring clockwise.
øThe (ALARM/SERIES REC SET) menu appears.
<ALARM/SERIES@REC@SET>
*ALARM@SET
@@MODE@@@@@@@@@@@Y1
@@SPEED@@@@@@@@@@3H
@@DURATION@@@@@@@20S
*1@SHOT@SET
@@FIELD@@@@@@@@@@1
@@INTERVAL@@@@@@@1M
*SERIES@REC@@@@@@N
*TAPE@END@OUT@@@@3:00
4TurnJOGthedial until the“FIELD” setting is highlighted, then turn the SHUTTLE ring clockwise.
5TurnJOGthedial to set the number of fields (images) to record every time(1, 2, 3, 4, 5, 10, 30, 60), then turn theSHUTTLE ring clockwise.
6 TurnSHUTTLEthe ring clockwise.7TurnJOGthedial to set the interval between each image recording (1M, 2M, 3M), then turn the SHUTTLE ring clockwise.
8PressMENUtheEXIT button.
9PressRECthebutton.øThe single image recording mode will be activated (the VCR will be in recording
FPressRECthebutton one more time, or send a trigger through the1 SHOT IN terminal on the back panel, to start the single image recording.
œDuring“INTERVAL”the period set for single image recording, the WARNING OUT terminal will not be 0 V even if the“NON REC” on the (WARNING OUT/CONTROL SET) menu is set to “Y”.
œIf a single image recording trigger i theREC button is not pressed) during the duration set
for“INTERVAL”, single image recording will be conducted automatically after the set duration.
œIf a single image recording trigger i
REC button is pressed) during the duration set for “INTERVAL”, single image recording will be conducted immediately.
œWhen using1 SHOTtheIN terminal, connect a
Recording of set number of images
|
|
|
|
|
|
|
|
|
|
Input of single |
|
|
|
|
| Input of single image | |||
image recording |
|
|
|
|
| recording trigger | |||
trigger |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“INTERVAL” setting (1, 2 or 3 minutes)
NOTE:
œIf a setting“1” is selectedotherfor “FIELD”thanat
step 5, recording will be done in
G When finished,STOP buttonpress. the
English | 33 |