Sanyo TLS-9924P Setting the Tape Management Function, TAPE MANAGEMENT, JOG, JOG, JOG, MENU, setting, Once the, EXIT button, dial until the, dial until the, dial until the

RQ4Q/EX (TLS-1960P GB) Wed. May, 08/2002

TAPE MANAGEMENT

Setting the Tape Management Function

1 PressSTANDBY/ONthe button.

2PressMENUthebutton to display the MAIN MENU.

3TurnJOGthedial to select the“6.TAPE MANEGEMENT” line, then turn the SHUTTLE ring clockwise.

øThe (TAPE MANAGEMENT) menu appears.

<TAPE@MANAGEMENT>

*TAPE@MANAGEMENT@@@@N

*PROTECT@DAY@@@@@@@30

*REC@PASS@SET@@@@@@10

*GROUP@NO.SET@@@@@OFF

*OVERRIDE@@@@@@@@@@@N

4 TurnSHUTTLEthe ring clockwise.

5TurnJOGthedial to select the desired mode, then turn theSHUTTLE ring clockwise.

N. . . . . . . The tape management function is not active.Y. . . . . . . The tape management function is active.

When setting to“Y”, please continue with the settings below.

6TurnJOGthedial until the“PROTECT DAY” setting

is highlighted, then turn the SHUTTLE ring clockwise.

7TurnJOGthedial to select the desired number of days to protect the tape, then turn theSHUTTLE ring clockwise.

OFF . . . . The tape is not protected.

1-255 . . . Number of days to protect the tape (prevent over-recording), from the date of the last recording on the tape (or the last expected recording date (calculated using the tape length (E-180) and the recording speed)).

8TurnJOGthedial until the“REC PASS SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

9TurnJOGthedial to select the desired number of re-recording times, then turn theSHUTTLE ring clockwise.

OFF . . . . The number of re-recording times will not be checked.

1-100 . . . Maximum number of re-recording times. (Refer to“Concerning the Number of Times Tapes can be Rerecorded on” on page 20.)

NOTES:

œSince data is read before it is rec number of times will be incremented recording is stopped before the end

œDuring autorepeat recording, the re times count will be updated every t rewound to the beginning. Autorepea will proceed even if“RECthe count exce

PASS SET” setting.

FTurnJOGthedial until the“GROUP NO. SET” setting is highlighted, then turn the SHUTTLE ring clockwise.

GTurnJOGthedial to select the desired group number, then turn theSHUTTLE ring clockwise.

OFF . . . . The group number will not be checked.1-15 . . . . Group number setting.

HTurnJOGthedial until the“OVERRIDE” setting is highlighted, then turn the SHUTTLE ring clockwise.

ITurnJOGthedial to select the desired override mode, then turn theSHUTTLE ring clockwise. (Refer to “Tape Management Conflict Display” on the next page.)

N. . . . . . . Only EJECT button operation is accepted after a conflict has occurred.

NOTE:	Y. . . . . . . The next operation is accepted after a
	conflict has occurred. This will override

œSince the last expected recording date is a setting.

calculated date (using the tape length (E-180) and J PressMENUtheEXIT button.

the recording speed), it may be different from the

actual last recording date, due to other settings

NOTES:

such as alarm recordings, programme timer recordings and holiday settingsœ Once the.tape management data is recorded on

tape, it cannot be changed.

œThe criteria (condition) for allowing based on the data recorded on the tap settings in the (TAPE MANAGEMENT) me

English 17