Sanyo TLS-9924P ALARM RECORDING, Alarm Recording Setting, N, Y4, Y3, Y2, Y1, JOG, JOG, JOG, JOG, 24H, JOG, MENU, Before, 20S-5M, SHUTTLE, 24-hour, SHUTTLE, already set

5 TurnSHUTTLEthe ring clockwise.

N. . . . . . .

Y4. . . . . .

Y3. . . . . .

Y2. . . . . .

Y1. . . . . .

RECORDING”.

œ FollowBeforethestarting steps, under“NORMAL

Alarm recording is performed when there is an input (trigger) at theALARM IN terminal.

Alarm Recording Setting

Alarm recording is not performed even if there is an alarm trigger.

Alarm recording is done only when there is an alarm trigger during programmed timer recording duration. VCR comes on records only for alarm duration. Timer recording is not possible.

Alarm recording is done only if there is an alarm trigger and the VCR is not in programmed timer recording mode.

Alarm recording is done only when there is an alarm trigger during duration of programmed timer recording.

Alarm recording is done when there is an alarm trigger.

ø The (ALARM/SERIES REC SET) menu appears.

*ALARM@SET

@@MODE@@@@@@@@@@@Y1

@@SPEED@@@@@@@@@@3H

@@DURATION@@@@@@@20S

*1@SHOT@SET

@@FIELD@@@@@@@@@@1

@@INTERVAL@@@@@@@1M

*SERIES@REC@@@@@@N

*TAPE@END@OUT@@@@3:00

3 TurnJOGthedial until the“MODE” setting is highlighted, then turn the SHUTTLE ring clockwise.

4 TurnJOGthedial to set the desired alarm recording mode, then turn theSHUTTLE ring clockwise.

CC . . . . . Recording as long as the alarm signal is being input (minimum 5 seconds)

1 PressMENUthebutton to display the MAIN MENU.

2 TurnJOGthedial to select the“5.ALARM/SERIES REC SET” line, then turn the SHUTTLE ring clockwise.

20S-5M. . Recording only for the displayed duration

By connecting theALARM IN terminal to a normally

open door switch, an interphone, etc., a recording can be done only when necessary.

6 TurnJOGthedial to set the desired alarm recording speed, then turn theSHUTTLE ring clockwise.

3H. . . . . . . . . . . . . . . . . 3-hour mode recording 12H. . . . . . . . . . . . . . . . 12-hour mode recording

24H. . . . . . . . . . . . . . . . 24-hour mode recording

NC . . . . . . . . . . . . . . . . Recording at the speed

already set

œ Make all necessary connections.

7 TurnSHUTTLEthe ring clockwise.

œ The alarm triggers are received while in recording, stop and stand-by modes. 8 TurnJOGthedial to set the desired alarm recording

duration (20S, 40S, 1M, 2M, 3M, 4M, 5M, or CC), then turn theSHUTTLE ring clockwise.

RQ4Q/EX (TLS-1960P GB) Wed. May, 08/2002

ALARM RECORDING

9PressMENUtheEXIT button.

NOTES:

œDuring alarm recording all buttons are

œIf“OFF” appears on the digital display, alarm recording is not possible in order to prevent the recorded tape to be recorded over. To cancel the “OFF” display, press the STOP, EJECT or PLAY button or turn theSHUTTLE ring.

œIf an alarm trigger is received while in progress, recording duration for t will be calculated from that point. T will register the alarm, but it will an alarm scan and alarm search.

œIf there is a power failure during al the power is restored within the reco duration, alarm recording will continu

œIf the alarm recording duration is sh may not be found during an alarm scan search. If the alarms are going to be alarm scan or alarm search, then in 3- 20-second or more recording duration

œTo do alarm recording during series r

“MODE” to “Y1” or “Y3”. Alarm recording will be conducted only if the VCR is recording.

œIf the recording“000”,speedthe recordingmode is will be in 3-hour mode irrespective of the alarm

recording speed mode setting.

English