134
43
6. Press the H2O2 Key for 5 seconds. The system check will start.
7. If the system is normal, the following display will appear. (If the system is not normal, refer to Table 2
on page 47.) Select OK and press the ENTER Key to start H2O2 decontamination. Decontamination will
be performed automatically to step 10. The buzzer will sound when decontamination has been completed
(It takes about 1 hour 40 minutes after warming-up).
Note: The outer door will be locked with an electric lock for safety until the decontamination has been
completed.
8. During the H2O2 mist generation, “H2O2 Decon” will flash at the top left corner of the screen.
Note: H2O2 mist generates from the H2O2 Generator and then quickly changes to a gas.
1 H 2 O 2 D ec o n t a mination
3
4 R e a dy t o S t a rt ?
5
6
M E N U
O K
C a n c e l
1 H 2 O 2 D e co n UV Resolve S t e p:4
2
3
4
5 T e m p : 4 5 . 0 㷄㩷
6 D o o r : L o c k e d
7
㧣OKP㧥㧜OKP
1 H 2 O 2 D e c o n t a m i n a t i o n
3
4 H 2 O 2 D e c o n S y s tem C h e c k ࡮࡮ ࡮ ࡮ ࡮
5
6
M E N U
O K
C a n c e l