STACKING INCUBATORS

Use the following procedure to stack Incubators. This work is potentially dangerous, so contact a Sanyo representative or agent.

1.㩷 Take out the stacking brackets (A and B), the protective stickers, and the four screws from the accessory bag.

CAUTION

When stacking two Incubators, use two stacking brackets (A and B) for each one. Only one pair of stacking brackets is provided per Incubator, so take out the brackets (A and B) from both Incubators.

2.Unplug both of the Incubators that are to be stacked.

3.Attach the protective stickers to the four corners on the top surface of the Incubator that is to be on the bottom. (See Fig. A.)

4.Remove the caps at the two places in the front of the top surface of the Incubator that is to be on the bottom, and secure stacking bracket A with the screws that are provided.

5.Remove the power supply panel (4 screws, wiring connectors in 3 places, ground wire, and gas pipe) from the Incubator that is to be on the top.

6.Place the upper Incubator on top of the lower one, being careful not to pinch your fingers.

7.Make the lower Incubator level by adjusting the legs, and then level the upper Incubator in the same way.

8.Secure stacking bracket A to the upper and lower Incubators with the accessory screws.

9.Remove from the back of the lower Incubator the two stabilizing brackets (4 screws) and remove from the upper Incubator the 2 screws on the lower rear panel.

10.Use the 6 screws that were removed in step 9 to secure stacking bracket B to the rear panels of the upper and lower Incubators.

11.Reconnect the power supply panel (4 screws, wiring connectors in 3 places, ground wire, and gas pipe) to the upper Incubator.

12.Use the stabilizing bracket on the back of the upper Incubator to prevent the Incubators from falling over.

CAUTION

ξSelect a floor that is strong enough to support the stacked Incubators.

ξNever stack three or more Incubators. Doing so is dangerous.

153

 

62

 

Page 62 Page 64
Page 63
Image 63
Sanyo MCO-19AIC, UV instruction manual Stacking Incubators, 153
Page 62 Page 64

MCO-19AIC, UV specifications

The Sanyo UV, MCO-19AIC is a state-of-the-art environmental chamber designed specifically for the storage and cultivation of microorganisms, cell cultures, and other sensitive biological samples. This advanced incubator features a unique combination of technologies that ensures precise temperature and humidity control, creating optimal conditions for various laboratory applications.

One of the standout features of the Sanyo MCO-19AIC is its advanced cooling system. The unit employs a dual air jacket design that offers superior temperature stability and uniformity. With a temperature range of 0°C to 65°C, it can accommodate a wide variety of experiments and samples. This temperature control is complemented by an integrated microprocessor that continuously monitors and adjusts the conditions inside the chamber, ensuring that they remain stable even when ambient conditions fluctuate.

Another important characteristic of the Sanyo MCO-19AIC is its humidity control capability. Utilizing an advanced humidification system, this incubator can maintain relative humidity levels from 40% to 95%. This feature is particularly important in applications requiring precise moisture levels, such as cell culture or the preservation of sensitive biological specimens.

The Sanyo MCO-19AIC is also equipped with a UV sterilization system that enhances safety and cleanliness within the chamber. This system utilizes ultraviolet light to eliminate potential contaminants, ensuring that the environment remains sterile for your sensitive samples. The use of UV light minimizes the risk of cross-contamination and provides peace of mind when working with critical biological materials.

In terms of user interface, the Sanyo MCO-19AIC features a digital display with intuitive controls that allow for easy set-up and monitoring of parameters. Users can easily adjust temperature, humidity, and other settings, while real-time data is continuously displayed on the screen. Additionally, alarms and monitoring systems alert users to any potential deviations from the set conditions, maintaining the integrity of the samples housed within.

Overall, the Sanyo UV, MCO-19AIC is an indispensable tool for any modern laboratory looking to cultivate or store biological samples with precision and reliability. Its combination of advanced cooling, humidity control, and sterilization features ensures that researchers can conduct experiments with confidence, making it a preferred choice in various fields, including microbiology, biotechnology, and pharmaceuticals. With its robust design and innovative technologies, the Sanyo MCO-19AIC stands out as a leading incubator in the scientific community.
Top Page Image Contents