1.Outer door: The outer door is held to the frame with a magnetic seal. A door heater is installed in the door panel. The door opening is reversible. Contact a Sanyo representative or agent to change the door hinge from left to right or vice versa.

2.Inner door: The inner door is made of tempered glass. However do not subject the glass to excessive impacts.

3.Leveling feet: The leveling feet can be turned to adjust the height. Adjust the feet so that the Incubator is level.

4.Trays: The trays can be pulled forward.

5.Tray supports: The tray supports can be removed by lifting the front side and pulling toward you.

6.Side supports: The right and left side supports can be removed for disinfection. Refer to page 36 and

7.Fan cover: The fan cover serves as the inlet for circulating air. It is removable.

8.Duct: The duct for the path for circulating air. It is removable.

9.Fan (inside the duct): The fan is made from polypropylene resin. It can be disinfected in an autoclave.

10.Sample air outlet: The sample air outlet also functions as an internal gas outlet. Normally, cover this outlet with the sample air outlet cap.

11.Connecting port A/B for CO2 gas pipe: When the optional MCO-21GC Automatic CO2 Cylinder Changeover System is installed, both ports A and B are available. If the MCO-21GC is not installed, only

port A is available. Refer to page 14 for gas cylinder connection. Ensure that the gas pressure is set at 0.03 MPaG (0.3 kgf/cm2G, 4.3 psiG). Refer to page 57 for automatic CO2 cylinder changeover system.

12.Door switch: The door switch detects when the door is open and stops the circulating fan and electromagnetic valve for CO2 and UV lamp.*

13.Humidifying pan: Fill the humidifying pan with sterile distilled water. Install the pan properly so that it can be covered with the pan cover.

14.Humidifying pan cover: The cover prevents UV light entering the chamber. When filling the pan, lift the front side and take out the pan. Refer to page 39 for details.

15.UV lamp*: This Sanyo UV lamp does not generate ozone. Never look directly at the UV light. For replacement, contact a Sanyo representative or agent.

16.Water level sensor for humidifying pan: This sensor detects the water level in the humidifying pan. Refer to page 35 for details.

17.Remote alarm terminals: Refer to page 11.

18.Access port: Place the silicon caps on the port both outside and inside when the port is not being used.

19.Power switch: This is the main switch for the Incubator. It also functions as an overcurrent breaker.

20.Glow starter*: The glow started if for the UV lamp (model FG-7P)

21.Attachment location for electric key: This is the attachment location for the electric key included in the optional Component H2O2 Decontamination Kit (MCO-HL). This kit must be attached to perform H2O2 decontamination. Refer to the installation procedure for MCO-HL for details.

22.Sample air outlet cap: Always attach this cap except when using the sample air outlet.

* MCO-19AIC(UV) or when an optional UV System Kit (MCO-19UVS) is installed.

9

 

100

 

Page 9 Page 11
Page 10
Image 10
Sanyo UV, MCO-19AIC instruction manual 100, Remote alarm terminals Refer to
Page 9 Page 11

MCO-19AIC, UV specifications

The Sanyo UV, MCO-19AIC is a state-of-the-art environmental chamber designed specifically for the storage and cultivation of microorganisms, cell cultures, and other sensitive biological samples. This advanced incubator features a unique combination of technologies that ensures precise temperature and humidity control, creating optimal conditions for various laboratory applications.

One of the standout features of the Sanyo MCO-19AIC is its advanced cooling system. The unit employs a dual air jacket design that offers superior temperature stability and uniformity. With a temperature range of 0°C to 65°C, it can accommodate a wide variety of experiments and samples. This temperature control is complemented by an integrated microprocessor that continuously monitors and adjusts the conditions inside the chamber, ensuring that they remain stable even when ambient conditions fluctuate.

Another important characteristic of the Sanyo MCO-19AIC is its humidity control capability. Utilizing an advanced humidification system, this incubator can maintain relative humidity levels from 40% to 95%. This feature is particularly important in applications requiring precise moisture levels, such as cell culture or the preservation of sensitive biological specimens.

The Sanyo MCO-19AIC is also equipped with a UV sterilization system that enhances safety and cleanliness within the chamber. This system utilizes ultraviolet light to eliminate potential contaminants, ensuring that the environment remains sterile for your sensitive samples. The use of UV light minimizes the risk of cross-contamination and provides peace of mind when working with critical biological materials.

In terms of user interface, the Sanyo MCO-19AIC features a digital display with intuitive controls that allow for easy set-up and monitoring of parameters. Users can easily adjust temperature, humidity, and other settings, while real-time data is continuously displayed on the screen. Additionally, alarms and monitoring systems alert users to any potential deviations from the set conditions, maintaining the integrity of the samples housed within.

Overall, the Sanyo UV, MCO-19AIC is an indispensable tool for any modern laboratory looking to cultivate or store biological samples with precision and reliability. Its combination of advanced cooling, humidity control, and sterilization features ensures that researchers can conduct experiments with confidence, making it a preferred choice in various fields, including microbiology, biotechnology, and pharmaceuticals. With its robust design and innovative technologies, the Sanyo MCO-19AIC stands out as a leading incubator in the scientific community.
Top Page Image Contents