LENS SETTING (LENS)
4 | D/N SETTING - B/W | 5, 6 | D/N SETTING - B/W | ||
| AGC MAX GAIN | +6· |
| AGC MAX GAIN | +6· |
| DNR | ON |
| DNR | ON |
| BURST | OFF |
| BURST | ON |
| FOCUS | 1 |
| FOCUS | 1 |
| PRESET | OFF |
| PRESET | OFF |
| MENU | BACK |
| MENU | BACK |
4DNR setting
Use the cursor button (j or l) to move the cursor to DNR, and then use the cursor button (d or c) to select the digital noise reduction setting (e.g. ON).
Available settings:
•ON: DNR (digital noise reduction) is applied. This reduces interference at low luminance levels.
•OFF: DNR is not applied.
Note:
•Digital noise reduction operates when the gain control increases. In addition, blurring and ghosting of images can occur when moving images are being monitored, and so the resolution is also reduced slightly.
•If AGC MAX GAIN is set to “OFF”, DNR will be forcibly set to “OFF”.
5BURST setting
Use the cursor button (j or l) to move the cursor to BURST, and then use the cursor button (d or c) to select the burst setting (e.g. ON).
Available settings:
•ON: The color burst signal is turned on.
•OFF: This should normally be set to “OFF”.
6FOCUS setting
Use the cursor button (j or l) to move the cursor to FOCUS, and then use the cursor button (d or c) to select the focus setting (e.g. 1).
Available settings:
•1:
•2: Visible light spectrum is set.
Note: This is set to “1” at the time of shipment from the factory. If the images are out of focus, change it to “2”.
☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.
English
30