Sanyo VCC-ZM400 Note:, Note:, English, MWB setting, ATW setting, Use the cursor button, Use the cursor button, Use the cursor button, Available settings: 0 –

VIEW SETTING

English

White balance additional settings 1MWB setting

1	VIEW SETTING	1		2	MWB SETTING
	IRIS	AUTO	‚		(OFFSET)
	WHITE BALANCE	MWB	‚		R í---ú--+------ü	70
	SHUTTER	LONG ‚
	MOTION	OFF			B í---ú--+------ü	66
	APERTURE	ON	‚
	GAMMA	ON

1Use the cursor button (j or l) to move the cursor to WHITE BALANCE, then use the cursor button (d or c) to select a white balance type (e.g. MWB). Then press the SET button.

The MWB SETTING screen will appear.

2Use the cursor button (d or c) to adjust the value for “R” (red).

Available settings: 0 – 255

Note: The larger the number, the stronger red becomes.

3Use the cursor button (j or l) to move the cursor to “B”, then use the cursor button (d or c) to adjust the “Blue” value.

Available settings: 0 – 255

Note: The larger the number, the stronger blue becomes.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

White balance additional settings 2

ATW setting

Automatic white balance settings are completed when ATW is selected. However, white balance will not be suitably adjusted if a bright light source or an excessively dark area from the environment is in the image. In this case, the bright light source or dark area should be masked so that it will not be detected.

1	VIEW SETTING	1	2	ATW SETTING
	IRIS	AUTO ‚		MASKING	ON	‚
	WHITE BALANCE	ATW	‚
	SHUTTER	OFF		SMART ATW	OFF
	MOTION	OFF
	APERTURE	ON	‚
	GAMMA	ON

1Use the cursor button (j or l) to move the cursor to

ATW for WHITE BALANCE and press the SET button. The ATW SETTING screen will appear.

2Use the cursor button (d or c) to select ON forMASKING, then press the SET button.

The ATW MASKING screen will appear with the mask pattern blinking in the upper left corner of the screen.

43