Manuals / Brands / Photography / Security Camera / Sanyo / Photography / Security Camera

Sanyo VCC-ZM400 OPTION SETTING, 485:, RATE, Note:, COAX:, English, CONTROL setting, ☞Option settings, CONTROL setting:, ADDRESS setting:, Available settings:

1 68

Download 68 pages, 642.25 Kb

OPTION SETTING

1	MAIN MENU		2	OPTION		3	RS-485 SETTING		4	RS-485 SETTING
	LANGUAGE	SET	‚	CONTROL	485	‚	BAUD RATE	19200		BAUD RATE	19200
	CAMERA ID	OFF		ADDRESS	0		TERMINATE	OFF		TERMINATE	OFF
	SYNC	INT		ALARM	SET	‚	TERMINATE	OFF		TERMINATE	OFF
	PRIVACY MASK	SET	‚
	LENS	SET	‚
	MIRROR	OFF
	VIEW SETTING	1	‚
	OPTION	SET	‚

English

☞Option settings

•CONTROL setting: This sets whether other peripheral devices can be used to operate the camera by means of the RS-485 interface or a linked coaxial cable.

•ADDRESS setting: Use this to set the address for this camera when more than one camera is connected or when other peripheral devices or a system controller have been connected. (See p57)

•ALARM setting: This is used for settings related to alarm input and alarm output. In addition, it is also used to force selection of COLOR mode or B/W mode when the DAY/NIGHT setting function is being used. (See p57)

CONTROL setting

1Use the cursor button (j or l) to move the cursor to

SET for OPTION, then press the SET button. The OPTION screen will appear.

Note: The PRESET ON setting cannot be used when OPTION settings are in use.

2Use the cursor button (j or l) to move the cursor to 485 for CONTROL, use the cursor button (d or c) to select the device to be operated (e.g. 485), and then press the SET button.

The RS-485 SETTING screen will appear.

Available settings:

•485: For operation by the System Controller

•COAX: For operation of device by linked coax cable.

3Use the cursor button (d or c) to select 19200 for BAUDRATE.

Available settings: 19200, 9600, 4800, 2400

4Use the cursor button (j or l) to move the cursor to TERMINATE, and then use the cursor button (d or c) to select the terminate setting.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

56

Contents

About this manual Acerca de este manual À propos de ce manuel CONTENTS INFORMATION TO USER PRECAUTIONS PARTS NAMES AND FUNCTIONS PARTS NAMES AND FUNCTIONS Camera installation bracket CAUTION: Control terminals 1Zoom terminal (ZOOM) CONNECTIONS Basic connection for monitoring or recording Connection of peripheral equipment and controller terminal DISPLAYING/CLOSING THE MENU SCREEN MENU ITEM FLOW AND MENU OPERATION LANGUAGE SETTING CAMERA ID SETTING SYNC SETTING (SYNC) PRIVACY MASK SETTING (PRIVACY MASK) PRIVACY MASK SETTING (PRIVACY MASK) (About the POSITION screen) PASSWORD setting Use the cursor button (j or l) to move the cursor to Enter the factory set password “1234” Use the cursor button (j or l) to select “1”, then use the cursor button (c) 3Use the same steps to enter “2”, “3” and “4”, then press the SET button PASSWORD LOCK cancellation 1Press the SET button 2Enter the factory set password “1234” PASSWORD changes 1Use the cursor button (j or l) to move the cursor to LENS SETTING ITEM FLOW LENS SETTING (LENS) LENS SETTING (LENS) 5 Use the cursor button (j or l) to move the cursor to SET for AREA, and press the SET button area. (e.g. 3) button BZOOM setting Zoom speed setting Use the cursor button (d or c) to select the zooming speed. (e.g. 4) EL ZOOM (Electronic zoom) magnification setting 5V-RESO.UP(Vertical resolution sensitivity) setting •IRIS SETTING: SENSE UP (x2...)(See p40) •VIEW SETTING: SHUTTER (LONG)(See p47) •D/N SETTING: DNR (ON)(See p25) CDAY/NIGHT setting AUTO B/W B/W: (Fig. 1) ☞AUTO mode setting MULTI +9dB 3AGC MAX GAIN setting 4DNR setting 5BURST setting 6FOCUS setting 7LEVEL setting MID: ADJ: Available settings: 1 – ☞COLOR mode setting 1 Use the cursor button (j or l) to select SET for LENS 3 AGC MAX GAIN setting then press the SET button 2 Use the cursor button (j or l) to move the cursor to ☞B/W mode setting +6dB Set AGC MAX GAIN to “OFF” and then press the SET button Page ☞Day/Night mode operation from the system controller •COLOR mode: AUX Enter •B/W mode: MIRROR SETTING VIEW SETTING ITEM FLOW VIEW SETTING ITEM FLOW (About creating image setting files in VIEW SETTING) VIEW SETTING Backlight compensation additional settings Backlight compensation settings CENT MASK •Multi-spotevaluative metering (MULT) •5 spot centerweighted average metering (CENT) Example of setting the mask in the center weighting position TOP: BOTTOM: LEFT: RIGHT: •48 multi-spotmetering (MASK) 1 Use the cursor button (d or c) to select MASK, then 3 Finishing mask pattern setting 2 Use the cursor button (j l d c) to move the cursor to SENSE UP setting LEVEL setting Manual iris setting 3Electronic IRIS setting Use the cursor button (d or c) to select El. (e.g. ON) 4Lens aperture setting BWHITE BALANCE adjustment Available methods: ATW (Auto trace white balance) AWC (One-pushautomatic white balance) MWB (Manual white balance) White balance additional settings MWB setting 2Use the cursor button (d or c) to adjust the value for “R” (red) ATW setting 2Use the cursor button (d or c) to select ON for ☞SMART ATW setting ON AWC setting CElectronic SHUTTER setting Fast shutter speed (SHORT) mode setting 3Use the cursor button (d or c) to select a electronic shutter speed Slow shutter speed (LONG) mode setting ELS 2Use the cursor button (d or c) to select a electronic shutter speed •MOTION: ON •IRIS: AUTO item SENSE UP (activated) or MANU item El (ON) DMOTION detector setting LONG 3 MOTION SIZE setting select ON. Then press the SET button Page MOTION MASKING setting 3Finishing motion pattern setting SENSITIVITY setting When necessary, adjust the following settings ☞Motion sensitivity (MOVE) setting ☞Brightness level (Y-LEVEL) ☞Brightness differences (Y-DIFFER) INTERVAL setting ALARM SIGN setting EProfile compensation setting (APERTURE) 1 Set the horizontal profile compensation 2Set the vertical profile compensation FGAMMA correction setting SMART 1: SMART 2: 55 button OPTION SETTING OPTION SETTING ADDRESS setting ALARM setting A Alarm input setting (ALARM IN) 4POLARITY setting NO: NC: 5Motion sensor input setting (MOTION) 1External alarm input B Color/black & white selection setting (DAY/NIGHT) CAlarm output setting (ALARM OUT) 1ALARM OUT setting 2POLARITY setting 3ALARM TIME setting DOperation of alarm signal output to the System Controller setting (LINE OUT) MENU FLOW MENU FLOW SPECIFICATIONS SERVICE MAIN FEATURES SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS EXCLUSIONS ATTENTION