LENS SETTING (LENS)

English

☞Day/Night mode operation from the system controller

The Day/Night setting (AUTO, COLOR and B/W) can be switched using “CAMERA” operating range of the system controller. Press the following buttons in the order given to change the mode setting.

•COLOR mode:

“AUX“ → “AUX” → “1” → “Enter” → “+” button

•B/W mode:

“AUX“ → “AUX” → “2” → “Enter” → “+” button

•AUTO mode:

“AUX“ → “AUX” → “3” → “Enter” → “+” button

D VIEW ANGLE setting

The VIEW ANGLE setting should normally be left at “OFF”.

1

MAIN MENU

 

2

LENS

 

 

LANGUAGE

SET

‚

FOCUS

MANU ‚

 

CAMERA ID

OFF

 

 

 

 

SYNC

INT

 

ZOOM

SET ‚

 

PRIVACY MASK

SET

‚

 

 

 

LENS

SET

‚

DAY/NIGHT

AUTO ‚

 

MIRROR

OFF

 

 

 

 

VIEW SETTING

1

‚

VIEW ANGLE

OFF

 

OPTION

SET

‚

 

 

 

PRESET

OFF

 

PRESET

OFF

 

MENU

END

 

MENU

BACK

1Use the cursor button (j or l) to select SET for LENS, then press the SET button.

The LENS screen will appear.

2Use the cursor button (j or l) to move the cursor to VIEW ANGLE, and then use the cursor button (d or c) to select the setting (e.g. OFF).

Available settings:

•OVER: The image angle for images being monitored is set to 1.05.

•OFF: This should normally be set to “OFF”.

Note: This should normally be set to “OFF”. However, vignetting may occur in the corners of the images because of the zoom position. This is not normally a problem, but if you are concerned about it, change the setting to “OVER”. The vignetting will then be less apparent.

31