VIEW SETTING
English
1 | VIEW SETTING | 1 | 2 | ES SETTING |
|
| IRIS | MANU | ‚ | SHUTTER SPEED | x1 |
| WHITE BALANCE | ATW | ‚ |
|
|
| SHUTTER | LONG ‚ |
|
| |
| MOTION | OFF |
|
|
|
| APERTURE | ON | ‚ |
|
|
| GAMMA | ON |
|
|
|
| PRESET | OFF |
| PRESET | OFF |
| MENU | BACK |
| MENU | BACK |
1Use the cursor button (j or l) to move the cursor to SHUTTER, then use the cursor button (d or c) to select the speed mode for the electronic shutter. (e.g. LONG) Then press the SET button.
The ES SETTING screen will appear and x1 (1/60 sec) will be blinking. This setting is suitable for dark target objects.
Note: When setting the electronic shutter, the ELS button on the system controller can only be used to turn the electronic shutter on and off.
2Use the cursor button (d or c) to select a electronic shutter speed.Available settings: x1, x2, x4, x8, x16, x32 (Field times shown as multiples.)
☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.
Note:
SHUTTER (LONG) cannot be set if any of the following settings is active.
•MOTION: ON•IRIS: AUTO item SENSE UP (activated) or MANU item El (ON)47