Sanyo VPC-C1EX Preparing and using the remote control unit, Prepare the remote control unit

5:￿￿Set￿':A5CP[Q￿DQQM￿￿￿￿￿￿￿￿￿￿￿the camera in the docking￿￿￿￿￿￿￿￿￿￿station￿￿!￿"

1 Close the camera’s monitor unit,

and set it in the docking station. e Note the camera’s orientation and

the position of the docking station terminals, and insert the camera firmly.

e Recharging begins as soon as the camera is set in the docking

station.

e During charging, the charging indicator lights red. When charging is complete, the charging indicator lights green.

eIf there is a battery malfunction or if the camera is incorrectly set in the docking station, the charging indicator flashes red, and the docked camera’s multi-indicator flashes red. Set the camera in the docking station correctly.

Preparing and using the remote control unit

Use the supplied remote control unit to play back data from the docked camera.

Prepare the remote control unit

The remote control unit comes with the battery already installed at the time of purchase.

1 Pull out and remove the protective battery insulating sheet.

e The remote control unit becomes operative when the insulating sheet is removed.

English 132