Sanyo VPC-C1EX Sleep function is active, 5A5CPQDQQMTurning on the camera when the power save!#

5:￿￿￿':A5CP[Q￿DQQM￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿Turning on the camera when the power save￿￿!￿"#

(sleep) function is active

In order to preserve battery pack power, the power save (sleep) function will automatically turn off the camera after one minute of no use during shooting, or five minutes of no use during playback (factory-preset setting).

e When the power save function is active, you can restore the power by any of the following methods:

Move the main switch.

Press the ON/OFF button.

Press the MENU button.

Press the SET button.

eAfter the power save function has been active for about 1 hour, the camera will switch to the standby mode. In this case, you can restore the power by pressing the ON/OFF button, or by closing and then opening the monitor unit.

eWhen the AC adapter/charger is connected, the power save function will become active about 10 minutes after the camera is turned on (factory- preset setting).

eWhen the camera is connected to a computer or printer, it does not change to the power save mode. In this case, the power save function becomes active after about 12 hours.

eThe user can specify the time elapsed before the power save function is activated (page 119).

eWhen the camera is connected to a computer or printer, it does not change to the power save mode. In this case, the power save function becomes active after about 12 hours.

English 38