Sanyo VPC-J1 Assigning File Names, File number reset function on, File number reset function OFF

ASSIGNING FILE NAMES

If a reformatted card is used, the file name (image number) of the captured image automatically begins from 0001. If the card is subsequently reformatted, or if a different reformatted card is used, the file names again begin from 0001. This is because the file number reset function is set to ON, and consequently it results in more than one card containing images with the same numbers. By setting the file number reset function to OFF, even if the card is reformatted or the card is replaced with another card, the consecutive numbering of file names continues from the last number recorded by the camera.

<File number reset function ON>

File name (image number)

Card A 0001, 0002 0012, 0013

Replace card

Card B

0001, 0002 0012, 0013

<File number reset function OFF>

File name (image number)

Card A 0001, 0002 0012, 0013

Replace card

Card B

0014, 00150025, 0026

œIf Card B already has image data in it when it replaces Card A, file names are assigned as follows.

œWhen the highest image number on Card B (before replacing) is lower than the highest image number on Card A: the file name of the next recorded image continues from last file name recorded on Card A.

Card A

0001, 00020012, 0013

Replace card

Card B

0001, 0002, 0014, 00150025, 0026

Previously recorded images

English 148