Sanyo VPC-J1EX instruction manual Checking the Remaining Battery Pack Charge, Info

CHECKING THE REMAINING BATTERY PACK CHARGE

When using the battery pack, the remaining battery pack charge can be checked on the LCD monitor. Make sure to check this indicator before capturing an image. For an indication of the possible length of time for battery pack operation, see page 192.

1 Display a Shooting or Playback Information Screen (see pages 115 and 133).

œThe battery pack remaining charge indicator appears in the lower right corner of the LCD monitor.

œçê and çë (flashing) will appear even when the Shooting Information Screen or Playback Information Screen is not displayed.

INFO 12

Remaining charge indicator

œDue to the battery pack characteristics, when the ambient temperature is low, çè may appear early for an incorrect indication of the remaining charge. Also, depending on the conditions of use of the digital camera or the ambient conditions (temperature, etc.), the indicated remaining charge may change. Therefore, this indication can only be used as a general approximation of the remaining charge.

Information Screen
	When
Information	Information	Battery pack remaining charge
	Screen is
Screen
	not
	displayed
çé	No indication	Approx. full.
çè	No indication	Power is low.
çê	çê	It will soon be impossible to capture or play back images.
		If this icon flashes when the shutter release button is
çë	çë	pressed, images cannot be captured. If it flashes while a
		video clip is being edited, the editing cannot be
		performed. Recharge the battery pack.

155English