SATO CX Series - page 13

SATO CX Series Printer

ROTATED FIELDS

ROTATED FIELDSROTATED FIELDS

ROTATED FIELDS

The printers can rotate each print field in 90° increments using the Rotate

command. There are two variations of this command.

•<ESC>% - The field rotates, but the base reference point for the field

remains the same.

•<ESC>R - The field and the base reference point rotate.

The following data stream will rotate the print field but will not change t he

base reference point of the field:

<ESC>A<ESC>%1<ESC>V800<ESC>H200<ESC>L0202<ESC>WB1E

The following data stream will rotate both the field and the base reference

point for that field:

<ESC>A<D><ESC>R<D><ESC>V0200<ESC>H0100<ESC>L0202<E

SC>P02<ESC>WB1E<ESC>Q1<ESC>Z<P255>

COMMAND DEFAULT SETTINGS

COMMAND DEFAULT SETTINGSCOMMAND DEFAULT SETTINGS

COMMAND DEFAULT SETTINGS

There are some types of commands that must have a va lue specified before

a label can be printed. If the data stream does not contain these commands,

a “default” value is assumed. The commands and the corresponding default

values are:

Command

CommandCommand

Command Default

DefaultDefault

Default Note

NoteNote

Note

Print Rotation 0° (1)