SATO CX Series Form Overlay, Store Form Overlay, StoreForm Overlay, Store, Form Overlay, Store

40
SATO CX Series Printer
Form Overlay, Store
Form Overlay, StoreForm Overlay, Store
Form Overlay, Store
Command Structure
<ESC>&
Example: See above
Placement: Must be preceded by al l other data and placed
just before the Stop command (<ESC>Z)
Default: None
Command Function
To store a label image in the volatile form overlay memory.
Only one label image may be stored in this memory area at
a time.
Input to Printer
<ESC>A
<ESC>H0100<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>&
<ESC>Z
Printer Output
There is no output from this command. It stores the label
image in the overlay buffer.
Special Notes
1. Remember that this storage is volatile. Therefore, if the
printer loses power, the overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay
Recall command, (See page 38).
3. Form overlays do not have to be re-compiled each time
they are called to be printed and therefore may result in
much faster print output.
4. The Expanded Print Length <ESC>AX, (See page 55),
cannot be used with this command. The maximum
length label that can be used with Forms Overlay is
177mm (7").