SATO CX Series Cutter Command Cutter CommandCutter Command, Cutter Command

SATO CX Series Printer

Cutter CommandCutter CommandCutter CommandCutter Command

Command Structure

<ESC>~aaaa or <ESC><NUL>aaaa

aaaa = Number of labels to print between e ach cut

(0001 to 9999)

Example: <ES>~0002

Placement: Following the <ESC>Q Print Quantity com-

mand

Default: Cut after each label if cutter installed

Command Function

To control the cutting of labels when using a SATO cutter unit

with the printer. This command allows the cutting of multi-

part tags or labels at a specified interval withi n a print job.

Input to Printer

<ESC>A

<ESC>H020

<ESC>V020

<ESC>WB1TEST LABEL

<ESC>Q3

<ESC>~002

<ESC>Z

Printer Output

This set of commands will print 6 labels, with 2 labels bet-

ween cuts.

Special Notes

1. You must have the optional printer Cutter installed to

use this function. Contact your SATO representative for

more information

2. To use this command, you must have the cutter enabled.

3. If the cut value is set at aaaa = 0000, the cutter is inac-

tive.

4. When using the Cutter command, the total number of

labels printed is the product of the cut value times the

print quantity. For example, if the cut value is 2 and the