SATO CX Series Rotate, Fixed Base Reference Point

SATO CX Series Printer

Rotate, Fixed Base Reference PointRotate, Fixed Base Reference PointRotate, Fixed Base Reference PointRotate, Fixed Base Reference Point

Command Structure

<ESC>%a

a = 0 Sets print to normal direction

1 Sets print to 90°CCW

2 Sets print to 180° rotated (upside down)

3 Sets print to 270° CCW

Example: <ESC>%3

Placement: Preceding any printed data to be rotated

Default: <ESC>%0

Command Function

To rotate the print direction in 90° increments without chan-

ging the location of the base reference poin t. The diagram

below illustrates the use of the <ESC>% Rotate command.

Note that the entire print area is shown, but your label will

probably not be as large as the entire area.

Input to Printer

<ESC>A

<ESC>%0<ESC>L202<ESC>H0200<ESC>V0100<ESC>MNOR

MAL DIRECTION

<ESC>%1<ESC>H0200<ESC>V0300<ESC>MONE

<ESC>%2<ESC>H0200<ESC>V0400<ESC>MTWO

<ESC>%3<ESC H0200<ESC>V0500<ESC>MTHREE

<ESC>Q1<ESC>Z