SATO CX Series - page 73

SATO CX Series Printer

Printer Output:

Special Notes

1. A reverse image area is affected by the rotate com-

mands. Therefore, always assume the printer is in the

normal print orientation when designing and sen ding

the Reverse Image command.

2. If using reverse images with the form overlay, place this

command before the Form Overlay command in the

data stream.

3. If the Rotate commands are used with this command, the

V and H parameters are reversed.

4. If the height and width to be reversed contain other than

alphanumeric data, the area is not printed.

5. If the values specified exceed the maximum ranges, the

reverse image is not created.