Basic Functions

41

2
Selecting Copy Paper

There are two ways to select copy paper:

❖
❖❖
❖

Auto Paper Select

The machine selects a suitable size of copy paper automatically based on the

original size and the reproduction ratio. ⇒p.43“Ro tated copy”

❖
❖❖
❖

Manual Paper Select

Choose the tray containing the paper you wish to copy onto: a paper tray, by-

pass tray or large capacity tray (LCT).

Reference

⇒p.61 “Copying from the Bypass Tray”

Limitation

❒Only the paper trays set to "No Display" or "RecycledPaper" in "Paper Type",

and also set to "Yes" in "Apply AutoP aperSelect", can be selected in Auto Pa-

per Select mode. ⇒"Paper Size Setting" in the System Settings manual

❒If you set all the papertrays other than "No Display" or "Recycled Paper", you

cannot use Auto Paper Selec t.

Note

❒See the following table for copy paper sizes and directions that can be used

with Auto Paper Select (when copying at a ratio of 100%).

❖
❖❖
❖
Metric version
❖
❖❖
❖
Inch version

❒For some originals, the original size might not be detected correctly. ⇒p.20

“Sizes difficult to detect”

❒When you load special paper, such as recycledpaper, in a paper tray, you can

have the papertype shown on the display. ⇒"Special Paper Indicat ion" in the

System Settings manual

Where OriginalIs Placed PaperSize and Direction
Exposure glass A3L,B4
L,A4
KL,B5
KL,A5
L,8
1/2"×
14"L,8
1/2"×13"L
Document feeder A3L,B4
L,A4
KL,B5
KL,A5
KL,8
1/2"
×13"L
Where OriginalIs Placed PaperSize and Direction
Exposure glass 11" ×17"L,8
1/2"×14"L,8
1/2"×11"KL,
10" ×14"L,8" ×10"L
Document feeder 11" ×17"L,8
1/2"×14"L,8
1/2"×11"KL,
10" ×14"L,5
1/2"×81/2"L