Size Magnification

Size Magnification

This function calculates an enlarge- ment or reduction ratio based upon the lengths of the original and copy.

Amm

amm

Preparation

Measure and specify the lengths of the original and copy by compar- ing "A" with "a."

Limitation

If the calculated ratio is over the maximum or under the minimum ratio, it is adjusted to within the available range of ratios automati- cally. However, with some ratios, parts of the image might not be copied or margins will appear on copies.

Note

A ratio is selected in the range of 25 to 400% (25-200% when placing originals in the document feeder).

APress the [Reduce/Enlarge] key.

BPress the [Specifd. Ratio] key.

2

CMake sure that the [Specifd. Ratio] key is highlighted.

DEnter the length of the original with the number keys, and then press the [#] key.

Note

You can enter sizes within the following ranges.

Metric

1 – 999mm (in 1mm steps)

version

 

 

 

Inch

0.1" – 99.9" (in 0.1" steps)

version

 

 

 

To change the length entered, press the [Clear] or {Clear/Stop} key and enter the new length.

79

Page 90
Image 90
Savin 2212, 2712 manual Size Magnification, APress the Reduce/Enlarge key BPress the Specifd. Ratio key