Stamp

FChange the stamp position, size or density.

If you do not wish to m ake a change, go to step G.

To change the stamp position, size or density

APress the [Change] key.

BSelect the desired position, size and density.

CPress the [OK] key.

Note

To cancel the settings, press the [Cancel] key.

GAfter you specify all the desired settings, press the [OK] key.

HPress the [OK] key.

Note

To cancel the settings, press the

[Cancel] key.

IPlace your originals, and then press the {Start}key.

User Stamp

The optional HDD and 32 MB of

 

memory are required to use this func-

 

tion (if the machine is equipped with

 

the Printer unit, 32 MB of memory is

 

not required).

2

Up to four messages which you use

frequently can be stored in the ma- chine's memory and stamped on cop- ies.

Preparation

Before using this function, you have to store your messages with the User Tools. ⇒ p.131 “Pro- gram/Delete User Stamp”

Limitation

You cannot use the bypass tray with this function.

Only one message can be stamped at a time.

Note

You can change the print page with the User Tools.

129

Page 140
Image 140
Savin 2212 User Stamp, To change the stamp position, size or density, 129, FChange the stamp position, size or density