Introduction
This manual contains detailed instructionson the operation and maintenanceof this machine. To get
maximumversatility from this machine all operators should carefully read and follow the instructions in
this manual. Pleasekeep this manual in a handy place near the machine.
Please read the Safety Informatio n before using this machine. It contains imp ortant information related
to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.
Notes
Some illustrationsmay be slightlydifferent from your machine.
Certain options may not beavailable in some countries. For details, please contact your local dealer.
Operator Safety
This machine is considered a class 1 laser device, safe f or office/EDP use. The machine contains o ne
GaAIAs laserdiode, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (orindirect re-
flected) eye contact with the laser beam might cause serious eyedamage. Safety precautions and in-
terlockmechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory o r ata locatio nw ith the requisite
equipment.The laser subsystem is replaceable in the field by a qualifiedCustomer Engineer. The laser
chassis is not repairable in the field. Customerengineers are therefore directed to return all chassis
and laser subsystemsto the factory or service depot when replacement or the optical subsystemis re-
quired.
Warning:
Use of controls or adjustmentor performance of procedures other than those specified in this manual
might result in hazardous radiation exposure.
Notes:
The model names of the machinesdo not appear in the following pages. Check the type of your ma-
chine before readingthis manual. (For details,see p.1“ MachineTypes”.)
• Type 1: 22copies/minute (81/2"×11"K)
• Type 2: 27copies/minute (81/2"×11"K)
Certain typesmight not be available in some countries. For details, pleasecontact your local dealer.
Two kinds of sizenotation are employed in this manual. With this machine referto the inch version.
For good copy quality,the supplier recommends that you use genuine tonerfrom the supplier.
The suppliershall not be responsible for any damage or expense that might result from the useof parts
other than genuineparts from the supplier with your office products.
Power Source
120V, 60Hz, 12A or more
Pleasebe sure to connect the power cord to a power source as above. For details about power source,
see p.209 “Power Connection”.