Combined Function Operations
11.{Start} key
Press to start copying. The default setting is for the originals to be scanned first, and then copied. You can also use this key to
1 resume an interrupted copy job (Restart Copy) or repeat a copy job (Repeat Copy).
12.Operation Switch
Use this to turn the power on or off. The power indicator is lit when the power is on.
13.Main power indicator
Light up when the main power switch is set to on.
14.{Scanner Stop} key
Press this key if originals are fed at a slant, or if you want to cancel scanning while an original is being fed into the ma- chine.
You can also use this to release the paper edge hold function.
Note
❒If [Rear: Edge Hold] is selected for "Original Output Tray" in System Set- tings, when the originals are output to the rear of the machine, the originals are held after they have been scanned. You can use the {Scanner Stop} key to release this paper edge hold function.
❒You can change the original output tray setting in User Tools. See p.20 “Original Output Tray”
6
