DolphinGB-Syst-F_V4_FM.book Page 22 Wednesday, May 2, 2001 1:19 PM

User Tools (System Settings)

Fine Magnification: Copier

2

ZEDG310E

Depending on the type of paper, and on the effects of humid or hot condi- tions, the copy paper can expand or shrink slightly. This can mean that the size of the copy and the original do not match, If this happens, you can specify the vertical and horizontal magnification ratio. You can specify this setting for each paper type. (Plain paper, Translucent Paper, Film, Other)

-1.0% to 1.0% (in 0.1% steps)

Note

Default: 0

The value can be set from -1.0% to 1.0% (in 0.1% steps).

To set the Fine Magnification setting, measure the length of the original and the copy image to calculate the ratio.

Calculating the Correction Value (%)

Example)

OriginalCopy

Horiz.

Horiz.

To copy at the same size as the original

correction value(%)

... For the example above:

Set the correction value (horizontal) to 0.8%.

ZEDG010E

22

Page 34
Image 34
Savin 4700WD manual Fine Magnification Copier, Calculating the Correction Value %