User Tools (System Settings)
Key Operator Tools
If the access code function has been set, you cannot access the key operator func- tion unless you enter the access code (up to 8 digits).
❖Key Operator Access
2 | The encrypted code used to access the management settings is called the ac- |
cess code. |
This setting specifies whether to use an access code (up to 8 digits) or not. You can also store the access code when you use the management settings.
• Off
• On
Note
❒Default: Off
❖User Code Access
Specifies whether to use user codes to limit or monitor the count for the [Copier] function.
❖Key Counter Access
Specifies whether to use the optional key counter to manage the count for the [Copier] function.
❖Set Key Card
Specifies whether to use the optional key card to manage the count for the [Copier] function.
❖Auto Off Timer
After copying, or no other key operations are performed, the machine turns itself off (apart from the main power switch) after a specified period. This is called a Auto Off. This setting specifies the time interval before entering this mode.
Note
❒Default: 60 minutes
❒The time can be set from 1 to 240 minutes.
❖AOF (Keep It On.)
Makes the Auto Off Timer setting active. Leave this set to on.
For details about this function, contact your service representative.
• On
• Off
Note
❒Default: On
26
