What to do If Something Goes Wrong
104
3
FSquare the paper and set it in the
tray.
Important
❒Do not stack paper over the lim-
it mark.
GWhile pressing the release lever,
adjust the side fences to the new
paper size.
Important
❒When setting small quantities of
copy paper, be careful not to
squeeze in the side fence too much
or paper will not be fed properly.
HLock the side lever.
IWhile pressing the release lever,
adjust the back fence to the new
paper size.
JAdjust the tray size with the pa-
per size selector to the new paper
size.
Note
❒If you cannot find your desired
paper size, select “p”, then set
the copy paper size with the “11
Special Pap. Size” setting in the
System Settings manual.
KPush the paper tray in until it
stops.