![](/images/backgrounds/151574/bg29.png)
Copying
30
2
Basic FunctionsThe following basic functions are ex-
plained in this section.
❖
Adjusting Copy Image Density
Auto and Manual Image Density
❖
Selecting the Original Type
Text, Text·Photo, Photo
❖
Selecting the Copy Paper
Auto Paper Select and Manual Pa-
per Select
❖
Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
❒You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See ⇒ P.116 “1. General
Features 1/4”.
❒You can change default settings for
basic functions. See ⇒ P.116 “Set-
tings You Can Change with the User
Tools”.
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
There are three ways to specify image
density:
❖
Auto Image Density
The machine automatically adjusts
the image density.
❖
Manual Image Density
If you require darker or lighter
copies, adjust the image density
yourself.
❖
Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.
Reference
You can change the density level
with the user tools. See “10. Text
Density” in ⇒ P.118 “1. General
Features 3/4”.
ASelect one of the Image Density
modes.
Auto Image Density
AMake sure that the Auto Image
Density indicator is lit.
Note
❒If it is not, press the {
Auto Im-
age Density
} key.
Manual Image Density
APress the {
Auto Image Density
}
key so the indicator goes out.