Other Functions
47
2
Other Functions

Energy Saver Mode—Saving

Energy

If you do not operate the machine for
a certain period after copying, or
when you press and hold the {
Energy
Saver
} key for more than one second,
the display goes blank and the ma-
chine enters Energy Saver mode.
When you press the {
Energy Saver
}
key again, when the originals are set
in the document feeder, or when the
platen cover or document feeder is
opened, the machine returns to the
ready condition. In Energy Saver
mode, the machine uses less electrici-
ty.
Energy Saver mode makes a two-step
reduction in electricity: one for the pe-
riod up to the time set for Low Power
mode, the other for the period after
that time.
Note
❒The period for which the machine
remains in Energy Saver mode (i.e.
the period until the mode is turned
off to return to the ready condi-
tion) varies with the effectiveness
of energy saving.
Reference
See “06. Panel Off Timer”, “07. En-
ergy Saver Level”, “08. Energy
Saver Timer” of the System Set-
tings Reference.

Interrupt—Temporarily

Stopping One Job to Copy

Something Else

You can make urgently needed copies
during a multi-copy run.
Note
❒The procedure for making inter-
rupt copies depends on which
kind of operation the machine is
currently carrying out.
While a document is being fed
APress the {
Interrupt
} key.
The key indicator lights.
BRemove the originals currently
set for copying, and set your orig-
inals for interrupt copying.
Reference
For functions that cannot be
used together with this func-
tion, see ⇒ P.80 “Combination
Chart”.
CPress the Start key.
The machine starts making your
copies.
DAfter interrupt copying, remove
the originals for interrupt copy-
ing and the copies.
EPress the {
Interrupt
} key again.
The key indicator goes off.
FReset the previous originals.
Then press the {
Start
} key.