Savin 9922DP, 9927DP 3. What to do If Something Goes Wrong

83
3. What to do If Something
Goes Wrong
If Your Machine does not Operate as You
Want
Message
Machine's Condition Problem/Cause Action
The machine instructs
you to wait. The machine is warming up. Wait for the machine to warm-up.
Reference
You can use Auto Start
mode during the warm-up
period. See ⇒ P.48 “Auto
Start—Entering Copy Job
Settings During the Warm-
up Period”
The machine cannot
detect the original
size.
Unsuitable original is set. See
⇒ P.17 “Sizes Difficult to De-
tect”.
Set non-standard size original
on the exposure glass.
Input the both horizontal and
vertical sizes of the non-stan-
dard original. See ⇒ P.27 “Set-
ting Originals on the Exposure
Glass”.
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/En-
large mode.
Original is not set. Set your originals.
The machine instructs
you to check the origi-
nal direction.
There is no copy paper that is
the same direction as the orig-
inals.
Set the original in the same di-
rection as the copy paper.
The machine instructs
you to check paper
size.
Unsuitable original size is set. Select the proper paper size.
The machine cannot
staple this size paper. -- Select the proper paper size that can be used in Staple
mode. See ⇒ P.38 “Staple”