Changing the Paper Size

105

3

Changing the Paper Size in

Tray 2

ACarry out steps A-J described in
"Changing the Paper Size in Tray
1 or the Optional Paper Table" ⇒
P.103 “Changing the Paper Size in
Tray 1 or the Optional Paper Ta-
ble”.
Note
❒If the size of paper you wish to
load is not shown on the scale,
slide the paper size selector to
the “p” mark then specify the
paper size and type.
BPush the switch-over lever to the
left or right depending on the
type of paper you have loaded:

Standard Paper

APush the switch-over lever to
the left.

Non-standard Paper

e.g. OHP transparencies, transpar-
ent paper, postcards etc.
APush the switch-over lever to
the right.
Note
❒When you push the switch-
over lever to the right, you
cannot use the following
functions.
• Sort/Stack/Staple
•Duplex
CPush the paper tray in until it
stops.

Setting the non-standard size paper

APress the 1 key to select the sec-
ond paper tray. Then press the {
#
}
key.
BPress the [
Pap.Size
] key.