ENGLISH
Preparation
Adjusting the LCD during PLAY
✤You can adjust the LCD during playback.
✤The adjustment method is the same as is used while in CAMERA mode. (See page 32)
Controlling Sound from the Speaker
The Speaker only works in PLAYER mode.
■When you use the LCD screen for playback, you can hear the recorded sound from the
-Follow the instructions below to decrease or mute speaker volume in PLAYER mode.
-Take the following steps to lower the volume or mute the sound while playing a tape on the camcorder.
1.Set the device to CAMCORDER and set the Power Switch to PLAYER mode.
2.Press 
(PLAY/STILL) to play the tape.
3.Once the tape is in play and you hear sound, use the MENU DIAL to adjust the volume.
■A Volume Level display will appear on the LCD.
Levels may be adjusted from anywhere between 0 to 19. You will not hear any sound when the volume is set on 0.
■If you close the LCD while playing, you will not hear sound from the speaker.
Notes
■When the cable is connected to the A/V jack, you cannot hear sound from the speaker and cannot adjust the volume.
■You can hear sound from the speaker by removing the connected cable from the A/V jack
| PLAY |
FADE | TAPE |
| MEMORY |
S.SHOW |
|
BLC | OFF |
| REC |
REV FWD
0 : 2 3 : 4 7
5 5 min
VOL. | [ 1 1 ] | 1 2 : | 0 0 | ||
|
|
|
| 1 0 . O C T . 2 0 0 3 | |
|
|
|
| ||
34
