ENGLISH
Functions
●DEMONSTRATION
✤Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily.
✤The DEMONSTRATION function may only be used in the CAMCORDER mode without a tape inserted in the camcorder.
✤The demonstration operates repeatedly until the DEMONSTRATION mode is switched OFF.
1.Set the device to CAMCORDER and set the power switch to REC mode.
2.Press the MENU button.
■The menu list will appear.
3.Turn the MENU DIAL to highlight INITIAL.
4.Select DEMONSTRATION from the submenu and press the MENU DIAL.
5.To activate the DEMONSTRATION, set DEMONSTRATION to ON.
■Press the menu button to quit the menu.
■The demonstration will begin.
CAMCORDER REC MODE
INITIAL | CLOCK SET |
CAMCORDER | WL. REMOTE |
CAMERA | REC LAMP |
MEMORY | BEEP SOUND |
VIEWER | SHUT. SOUND |
| DEMO |
CAMCORDER REC MODE
INITIAL SET |
|
CLOCK SET | SET TIME! |
WL.REMOTE |
|
RECORD LAMP |
|
BEEP SOUND |
|
SHUTTER SOUND |
|
DEMONSTRATION |
|
6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.
Notes
■The DEMONSTRATION function only works when there is no TAPE installed.
■The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after switching to CAMCORDER mode (when no tape is inserted in the camcorder).
■If you press other buttons (FADE, BLC, PHOTO, EASY) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate any other functions.
43
