ENGLISH
Functions
●DATE/TIME
✤The DATE/TIME function works in CAMCORDER or CAMERA mode and PLAY modes.
✤The date and time are automatically recorded on a special data area of the tape.
1.Press the MENU button.
■ The menu list will appear.
2.Turn the MENU DIAL to highlight VIEWER and press the MENU DIAL.
3.Turn the MENU DIAL to highlight DATE/TIME.
4.Press the MENU DIAL to select the
CAMCORDER REC MODE
INITIAL |
|
CAMCORDER |
|
CAMERA |
|
MEMORY | LCD ADJUST |
VIEWER | |
| DATE/TIME |
| TV DISPLAY |
5.Using the MENU DIAL, select DATE/TIME mode.
■You can choose to display - OFF, DATE, TIME, DATE/TIME
-OFF
-DATE only
-TIME only
-DATE & TIME
■To return to the previous menu, highlight the DATE/TIME in the middle and press the MENU DIAL.
6.To exit, press the MENU button.
Notes
■The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
■The DATE/TIME will read “- -
-During playback of a blank section of a tape.
-If the tape was recorded before setting the DATE/TIME in the Camera’s memory.
-When the lithium battery becomes weak or dead.
■Before you can use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 41.
CAMCORDER REC MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMCORDER REC MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE & TIME
44
