ENGLISH
Playback
Connecting to a TV which has No Audio and Video Input Jacks
✤ You can connect your camcorder to a TV through a VCR.
1.Connect the camcorder to the VCR with the Audio/Video cable. ■ The Yellow plug : Video
| ■ The White plug : Audio(L) |
|
| ■ The Red plug : Audio(R) - STEREO only |
|
2. | Connect the TV to the VCR. |
|
3. | Set the device to CAMCORDER. |
|
4. | Set the power switch to PLAY mode. |
|
5. | Turn on both the TV and VCR. | ANTENNA |
|
■Set the input selector on the VCR to LINE.
■Select the channel reserved for your VCR on the TV set.
6.Play the tape.
Playback
✤ You can play the recorded tape in PLAY mode.
1.Connect a power source and set the device to CAMCORDER.
2.Set the power switch to PLAY mode.
3.Using the 
(FF) and 
(REW) buttons, find the first position you wish to play back.
4.Press the 
(PLAY/STILL) button.
■ The images you recorded will appear on the TV after a few seconds.
■ If a tape reaches its end while being played back, the tape will rewind automatically.
VCR
TV
VIDEO
AUDIO(L)
AUDIO(R)
Multi A/V
cable
CAMCORDER
| PLAY |
FADE | TAPE |
| MEMORY |
S.SHOW |
|
BLC | OFF |
| REC |
REV FWD
Note
■The playback mode (SP/LP) is selected automatically.
78
