ENGLISH
Using the CAMCORDER - Advanced Recording
●WIND CUT
✤The WIND CUT function works in CAMCORDER, and PLAY modes.
✤The WIND CUT function minimizes wind noise or other noise while recording.
- When the wind cut is on, some low sounds are eliminated along with the sound of the wind.
1.Set the device to CAMCORDER and set the power switch to REC mode.
2.Press the MENU button.
■ The menu list will appear.
3.Turn the MENU DIAL to highlight CAMCORDER and press the MENU DIAL.
4.Select RECORD SET from the
CAMCORDER REC MODE
INITIAL
CAMCORDER 
RECORD SET
CAMERA 
PLAY SET
MEMORY
VIEWER
CAMCORDER REC MODE
5.Turn the MENU DIAL to highlight WIND CUT and press the MENU DIAL.
6.This feature toggles ON/OFF each time you press the MENU DIAL.
CAMCORDER SET
RECORD SET
PLAY SET
7. To exit, press the MENU button.
Notes
■Make sure WIND CUT is set to OFF when you want the microphone to be as sensitive as possible.
■Use the WIND CUT when recording in windy places such as the beach or near buildings.
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET |
|
DSE SELECT |
|
AUDIO MODE | 12bit |
WIND CUT |
|
AV IN/OUT | OUT |
64
