Remove the tension rods
SUPPLY
BLOWER
ACCESS
COIL
ACCESS
SUPPLY
BLOWER
ACCESS
COIL
ACCESS
SUPPLY
BLOWER
ACCESS
COIL ACCESS
SUPPLY BLOWER ACCESS
COIL
ACCESS
na3450a
WARNING
DAMAGE TO EQUIPMENT OR PERSONNEL
•Loosen the nuts on the ends of the tension rods to relieve tension before removing tension rod brackets.
•Do not remove the tension rods until EcoBreeze Frame is placed and secured on its supports.
•Move the EcoBreeze Frame directly from the truck to its permanent foundation or supports. If it must be stored temporarily, it must be placed on a flat and level surface to avoid damage.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
Tension rods are installed diagonally across each Module bay to provide support during shipping.
1.Release tension on the rods by loosening the nuts on the ends of the tension rods.
2.Using an M12 wrench, remove the eight bolts securing the tension rod brackets.
3.Remove the tension rods and brackets.
16 | EcoBreeze System Installation |
