Schneider Electric ACECFR40201SE, ACECFR20101SE, ACECFR20200SE Building Management System, 1MOD

Building Management System

The Modbus interface allows the EcoBreeze System to communicate with a building management system (BMS).

The Modbus connection is available in two locations on the Modbus hub:

•RJ-45 In port

•3-wire on terminal block

For an RJ-45 connection, wire as follows:

Pin 4	D(A)
Pin 5	D(B)
Pin 8	Ground

For a direct 3-wire connection, connect to the corresponding contacts on the green terminal block on the side of the Modbus hub. No connection is necessary to the 0V contact.

	WIRING CONTACTS		DDC PANEL
			ENCLOSURE
	FOR DIRECT 3-WIRE	RJ-45 IN PORT
	CONNECTION
		1MOD
	D(B)
	D(A)
	1MOD
na3660a	0 V

EcoBreeze System Installation 25