Schneider Electric ACECFR20200SE, ACECFR20101SE, ACECFR40200SE Electrical Connections

Electrical Connections

The electrical connections required are the following:

•Power to Frame

•Control (remote display interface)

•Communication - Building Management System (BMS) - optional

Make all electrical connections in accordance with applicable industry guidelines as well as national and local codes.

Make all low-voltage connections, including data and control connections, with properly insulated wires. The low-voltage wires and connections must have at least 300V insulation.

DANGER

HAZARD OF ELECTRIC SHOCK

Use a voltmeter to ensure that power is turned off before making any electrical connections.

Failure to follow these instructions will result in death or serious injury.

NOTE: Three-phase electrical service is required. Electrical service must conform to national and local electrical codes.

EcoBreeze System Installation 21