5.5.2Serial Port Parameters Label
On this label enter the parameters you are using at each of the serial ports. Place the label on the BM85 so that it canP readily identify the parameters in your application.
Figure 24 shows the layout of the label.
MODBUS | PORT 1 | PORT 2 | PORT 3 | PORT 4 |
MASTER / NTWK /
SLAVE (ADDRESS)
ASCII / RTU
BAUD RATE
STOP BITS / PARITY
TIMEOUT (100'S ms)
MODEM BOOSTER
Figure 24 Serial Port Parameters Label
890 USE 103 00
Installing the BM85 | 81 |
