Schneider Electric E4800 REGULATORY COMPLIANCE

930-110-01-B.00 PowerLogicTM EM4800 Series

04/2011 Regulatory Compliance

REGULATORY COMPLIANCE The PowerLogic EM4800 meter must be installed by a qualified electrician

with knowledge of local installation regulations. Initial installation of the unit,

and any subsequent modification to the unit, must be inspected by the local

electrical inspection authority.

The PowerLogic EM4800 meter complies with the standards listed in

Table 4.

Table 4: Regulatory Compliance

Equipment servicing and access The information in this section must be considered as a mandatory

requirement, and must be strictly adhered to when installing and operating

PowerLogic EM4833, EM4880 and EM4805 meters.

Access to equipment

The equipment must be accessible to authorized personnel only. Equipment

must be installed in areas where access can be restricted.

Servicing the equipment

No preventive maintenance is required on any of the equipment. Visually

inspect the equipment yearly and ensure it is free of dust or other particles.

If necessary, wipe with a clean cloth.

Component servicing

Individual components are not user-serviceable, and must be returned to

Schneider Electric for repair. If an equipment fault occurs, do not attempt to

repair the faulty component.

All maintenance activities should be performed by qualified personnel only.

Do not perform any operating or maintenance procedures that are not

described in the product documentation provided by Schneider Electric.

Discipline Regulatory and industry standard

Standards UL certified to IEC/EA/UL/CSA 61010-1 2nd Edition

CSA-C22.2 No. 61010-1-04

Emissions (EMC) FCC Part 15 Class B, ICES-003 EN55022, IEC 6100-4-5

Surge power/telephone lines ANSI/TIA968-A: 2002