Schneider Electric E4800

PowerLogicTM EM4800 Series 930-110-01-B.00

Installation 04/2011

In Diagnostics mode, the right and left arrow buttons scroll the display from

meter 1 to 8, 1 to 12, or 1 to 24, depending on your configuration. When the

local IP address is shown on the LCD, use the right and left arrow buttons to

scroll through the following information:

• Remote host server IP address

• Time server IP address

• Default IP address

• Default NetMask

• Default gateway

• PPP user name

• Phone number

• AT command string

• Alternate phone number

• Unit serial number

• Firmware build number

• Ethernet port MAC address

• Firmware revision

• Potential transformer ratio

Remote Display For installation and operating instructions for the EM4800 Remote Display

(part number METSxEM48RD), refer to the "PowerLogic Remote Display Kit

for EM4800 Meters" technical document.

Recording the Meter Map The final step in the installation process is to complete the Installation

Record, and record the mapping of the meters to the wired points. A copy of

Figure 16, which is organised to resemble a breaker panel, is provided with

each PowerLogic EM4800 meter, and is to be completed and delivered to

your system administrator.