Pausing or Stopping
The Console will go into Pause Mode if the user pushes STOP during a workout, or there is no RPM signal for 5 seconds (user not pedaling). The Console display shows WORKOUT PAUSED, and after 4 seconds the current workout data starts to scroll automatically (the same format as Results Mode). You can use the Increase/Decrease buttons to move through the results manually.
1.Push the STOP button to pause your workout.
2.To continue your workout, push START/ENTER or start pedaling.
To stop the workout, push the STOP button. The Console will go into Results / Cool Down mode.
User Statistics
Each User Profile stores the statistics from all workout data recorded for that user in three capaci- ties - Last Workout, Averages, and Totals.
When the TOTALS displayed for a statistic exceeds the maximum value, the count will start again at zero.
•Total number of
•Total
•Average
•Total
•Total
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1.Push the Schwinn Advantage™ button at the
2.Use the Increase() and Decrease() buttons to select a User profile, and push START/EN- TER to make your selection.
3.After you select the User profile option, you have two options: VIEW STATS and WORKOUT.
Use the Increase() and Decrease() buttons to go to the Statistics option, and push START/ ENTER to make your selection.
4.The Console display shows the User Statistics menu
5.Use the Increase/Decrease buttons to move between the values, or after a few seconds the workout statistics start to scroll automatically. You can use the Increase/Decrease buttons to move through the results manually. Push STOP to exit to the User Statistics menu.
39
